In order to make the glove machine run normally, reduce the occurrence of defective products, high machine efficiency, keep the machine clean, refueling on time is very important.

Biodegradable plastic bags are widely used in agriculture, especially the modern fermentation technology and the great demand for all kinds of greenhouse vegetables and fruits. As the main raw material of agricultural film, the blow molding technology of biodegradable bag has attracted much attention. After all, different time periods have different requirements for blowing film.

In order to ensure personal safety, the opening mechanism must be connected to the ground wire, and then connect the power supply, and then strictly check whether the motor operation of each part is correct, and pay attention to whether there is leakage phenomenon.

The new film blowing machine produced by the machinery industry has a sheet film blowing machine, foam film blowing machine, multi-layer composite film blowing machine, color strip film blowing machine, thermal shrinkage film blowing machine and so on. The packaging of products on the market, the quality of the film blowing has won the favor of commodity packaging.

Recently, Shanghai residents found that many supermarket checkout counters have been replaced by more expensive environmentally friendly shopping bags instead of the 20 or 30 yuan plastic bags used in the past. From Jan 1, 2021, the national "plastic bag limit" has been officially upgraded, with supermarkets no longer offering plastic bags and replacing them with non-woven and biodegradable plastic bags. Due to higher prices and poor quality, supermarkets are selling less than 10 per cent of their new shopping bags, while the price of the raw materials used to make them has risen by more than 10 per cent, yet demand is still outstripping supply.

In the process of blown film, we need to adjust the machine. There are many safety problems and technical operations that need our attention.

After the film blowing enterprise is put into production, in order to achieve the expected output of the enterprise, the film blowing machinery in the factory workshop basically runs continuously. Full load operation of the film blowing equipment for the loss of the fuselage is relatively large, if not timely to the film blowing machine fuselage for maintenance, long-term down the film blowing machine is prone to problems. So, as a film blowing machine operator, how to do a good job in maintenance? Now Guangdong Maoxin on how to maintain plastic film blowing machine and share a little related knowledge with you.

Do you find that the machine is often overspeed and shut down when making bags? Next, Maoxin electromechanical will analyze and answer the solutions to the problems of the machine one by one!

Many film production is often the use of PP film blowing machine for production, but there will be wrinkles in the production process, so how do we solve this situation?

Blowing film machine in the use of the process may appear a lot of problems, such as today to tell you the blowing film machine bubble is not stable fault:

The automatic air ring structure of the film blowing machine adopts double tuyere mode

ABA film blowing machine is also called false three-layer film blowing machine, his screw feed is two extruders extrusion die is three layers, the film is made of three layers of film, his first used for the production of filler A and A with new material B is the middle layer of filler so that the film made good quality and low cost.

The function of monolayer high pressure membrane is limited, including the use of a variety of additives, double layer co-extrusion is different, is multi-functional products.

ABA film blowing machine currently prevailing in the market packaging mainly to plastic, paper based, plastic film blowing machine based blowing industry in the market proportion is larger, but with the increasingly strict requirements of the paper industry, the new goal of environmental protection and energy saving raised the paper industry threshold, resulting in the paper packaging mall cost expansion, price rise.